Focal Utopia TBM

Features & specs

General
Speaker Size 1
Design 1-way
Tweeter Design M-Profile Inverted Dome
Impedance (Ohms) 4
Tweeter Composition Beryllium
Woofer Composition
Woofer Surround Butyl Rubber
Specifications
Sensitivity (1W at 1 meter) N/A
Sensitivity at 2.83 volts 95
Frequency Response 1500 – 50k Hz
Minimum RMS Wattage
Maximum RMS Wattage 20
Peak Power Handling (Watts) 200
Top-mount Depth (Inches) 0 13/16
Bottom-mount Depth (Inches) N/A
Cutout Diameter or Length (inches) 0

Product Research

Features

Magnet Cover: The included covers snap onto the tweeter magnets to create a “small volume” enclosure. The cover can be used with or without the flush mount housings. Without the magnet covers, the tweeters retain their IAL design (Infinite Acoustic Load).

Mounting: The tweeters are already installed in the flush mount housings when shipped. Each housing is mounted using the single screw hole in the rear. In the same way the tweeters are mounted in the housings using four screws, they can be mounted without the housing using the same screw holes. (Useful if your space won’t accommodate the size of the housing.) The tweeter depth is 0.585″ when mounted without the flush mount housing and with the magnet cover. Once installed the tweeters do not swivel.

Tweeter Mounting Dimensions:

w/o Flush Mount Housing With Flush Mount Housing
Mounting Height 0.247″ 0.152″
Mounting Depth 0.375″ 0.808″
Frame Length 2.541″ 2.942″
Frame Width 2.268″ 2.663″
Cutout Length 2.01″ 2.74″
Cutout Width 1.78″ 2.47″
18 Haziran 2016
4.220 kez görüntülendi