Focal ES 130 K 2Way Components
Specifications:
diameter | 5″ (100mm) |
---|---|
voice coil diameter | 1″ (25mm) |
voice coil height | 0-1/2(12mm) |
motor | Magnet |
tweeter | TKM (“M” profile aramid fiber inverted dome) |
cone | Composite K2 Power “W” sandwich cone |
surround | Tuned Mass Damper (TMD) |
separated crossover | 6-12/12dB (3.5kHz) |
tweeter adjustable level | +3; 0; -3dB/oct |
max power | 160W |
nominal power | 80W RMS |
sensitivity (2.83V/1m) | 90dB |
frequency response | 65Hz-22kHz |
impedance | 4 Ω |
impedance | Supplied grilles |
5″ TWO-WAY COMPONENT KIT
The ES 130 K offers great linearity, deep bass and an impressive SPL of 90.8 dB (2.83 V/1 m) in an extremely compact design.
This kit is composed of:
- Two 130 mm (5″) woofers featuring K2 Power Kevlar® cones endowed with the ideal qualities: lightness, rigidity and excellent damping. These speaker drivers deliver an extremely dynamic sound with perfect definition. The cones are fixed to the frame using TMD suspension, whose exclusive design removes unwanted resonances and reduces the effects of distortion.
- Two 20 mm aramid-fibre TKM inverted dome tweeters. Their exclusive “M”- shaped profile is designed to control deformation of the dome, and to perfectly reproduce high frequencies up to 22 kHz smoothly and with precision. Their compact crossovers are quick to install and easy to set up. Various accessories are supplied for assembling the tweeters, which can be installed in the factory locations, on tilting frames or flush-mounted.
The kit is supplied with aluminium and mesh grilles.> Discover our Made in France productsLEAVE A REVIEWEXCEPTIONAL SOUND FOR YOUR VEHICLE
The speaker drivers used for the K2 Power have been completely redesigned.
Each component is the result of extensive research in acoustics to push back the limits of performance, of power and of precision!
KEVLAR® CONE
Precision and dynamics
The K2 Power Kevlar® cone, a product of unique expertise Made In Focal, is to this day second to none. Composed of an ultra-light foam structure sandwiched between a thin layer of Kevlar® aramid fibres, and a layer of glass fibres, the K2 Power cone combines three key factors of quality acoustics: Rigidity / Lightness / Damping, for precise and dynamic sound.
NEW “M”-SHAPED TWEETER
For a precise and smooth high end
The new K2 Power TKM tweeter features an exclusive “M”-shaped structure. This new-generation aramid-fibre inverted dome tweeter provides great precision in the very high end, and its combination with a “push-pull” motor with IAL2 technology extends the low end of the frequency response and provides extraordinary harmonic balance.
TMD SUSPENSION
Say goodbye to distortion
Initially developed for Sopra high-fidelity loudspeakers, TMD suspension (Tuned Mass Damper) features a special structure designed to control unwanted resonance and drastically reduce the harmonic distortion caused by the stress the cone is subject to. This patented technology endows the speaker driver with a very realistic mid-range with great definition.
“Radial VC” cooling
for higher SPL
The new Radial VC cooling system for speaker driver voice coils expels hot air from the voice coil towards the bottom of the magnet through 6 holes. This improves control over the voice coil temperature, limiting the effects of thermal compression and improving reliability. This significantly increases the efficiency of the speaker driver. It also improves dynamics and produces a more powerful sound.
Progressive spider profile
Improved linearity and precision
The progressive spider profile of K2 Power speaker drivers is designed to provide a full-bodied sound at low levels and to increase linearity, precision and dynamic range.
An optimised crossover
for improved reliability
The components used for the new K2 Power crossovers were selected specifically and optimised in order to improve control over the effects of heat dissipation. These components, which are fundamental to managing the various channels and for the soundstage, are now even more reliable.